Idioma:
Sigue a:

Kingcera’s ceramic lined pipes fittings

Time:2018-12-03    Author:Michael Liu    Reader:

 
Kingcera have mainly three type of ceramic lined pipe fittings by different installations. Ceramic tiles lined pipe fittings, weldable ceramic tiles lined pipe fittings and ceramic sleeve lined pipe fittings. These wear&impact&high-temperature resistant ceramic lined pipe fittings are widely used in the thermal power generation ,steel plant,mining,cement,chemical and so on .
 
Today, I’m going to introduce our third type ceramic lined pipe fittings:

Ceramic sleeve lined pipe fittings.
 
Kingcera wear resistant ceramic sleeve lined pipes are used the alumina ceramic sleeves bonding into the inner wall of the carbon steel pipes/elbows with high-strength adhesive directly, it's a perfect product for the wear & acid &corrosion resistant for the chemical, mining and lithium battery manufacturing industry.
 
This method mainly applied in the small material conveying system where there is no impact. It can also apply in the high temperature conditions under less impact and small material sizes. Like lithium powder conveying pipe and elbows, mining slurry conveying pipe fittings and chemical conveying pipe and elbows under the strong acid or corrosion condition and so on. The diameter of the pipe fittings will be much better if it’s less than 400mm. 
 
  
Advantages: 
1. Superior wear resistance
2. Chemical and impact resistance
3. Erosion acid, alkali resistance 
4. Smooth inner wall
5. Easy installation 
6. Longer service lifetime
7. Saved maintenance time and expenditure
 
  • Add: NO.18,East Twelve Road,Changsha Economic and 
    Technological Development Zone, Hunan, China
  • Tel: +86-731-84019856
  • Fax: +86-731-84069186
  • E-mail: info@kingcera.com