News

Home > News >

HUNAN KINGCERA ENGINEERING CO.,LTD

  • Address: NO.18,East Twelve Road,Changsha Economic and Technological Development Zone,China
  • Postcode:410100
  • Fax:+86-731-84069186
  • E-mail:info@kingcera.com
  • Website:https://www.kingcera.com

  • Sales office
  • Tel:+86-731-84019856
  • Fax:+86-731-84069186

  • Service office
  • Tel:+86-731-84067818

KINGCERA’s Optimized Project for Bend Pulley

Time:2019-03-05     Author:Kevin Xiao    Reader:

 
The bend pulley, also known as the guide roller, is a key component of the common belt conveyor. It is mainly used to change the running direction of the conveyor belt or to press the conveyor belt to increase the wrap angle of the transmission drum. They are powerful transmission components used in conveyor and bulk handling applications. However, how to protect this pulley from slipping and guarantee the best production capacity becomes a headache for all mining and bulk material handling applications. 
 

 
Recently, one customer turned to KINGECRA for help as they wanted to solve the abrasion and slipping problems for their bending pulleys. They told us that they have been using the rubber layer on their bending pulley in the past years, but the result seemed not so good. Usually they have to welding steel bricks on pulley surface when the rubber layers worn out so that they could reduce down the slipping frequency. It takes much of their time and labor cost to do such maintenance.
 

 
We carefully analyzed the working condition and problems for our clients, then provided them with a satisfactory solution “Ceramic pulley layer”. This is an optimized project for KINGCERA, and we will keep focusing on the wear-solutions for all our customers home and abroad.
 
Related Articles